9
The ALARM PAGE is a pop-up window that displays the list of all current active faults.
Alarms are listed in reverse chronological order.
The most recent alarm will be shown at the top of the list.
16
Changing the engine parameter to be viewed
To select an alternate engine parameter to be viewed, press the ADJUST key (Key 4)
PRESS KEY 4 then
Press the Up or Down arrow key to select the
engine parameter to be changed. This will place
a box around the selected parameter. Press the
ADJUST key (Key 4) to scroll through the view-
able engine parameters to the one desired. Only
the parameters supported by a particular engine
model will be available for selection. Press the
BACK key when done making changes. NOTE:
The list of parameters shown below may not be
fully supported by the engine model selected.
Select engine parameters by pressing the
ADJUST key (Note: below is a list of typical
parameters that are available. Only parameters
supported by the engine model selected will be
available for viewing).
Pressing key 3 will silence the alarm until
a new alarm becomes active.
Key 1 and Key 2 are used to navigate
through the list of active faults. Press Key
4 to read the text information associated
with the selected fault.
When active fault information is displayed,
the fault can be cleared by pressing Key
3. The fault will then be removed from the
list.
Key 1 and Key 2 can still be used to
navigate through active faults.
Press Key 4 to go back to the fault list.
Press Key 5 to go back to the background
screen.
Press Key
3 to stop
the beeper
Press Key 4 to read
text information of
selected alarm
When giving infor-
mation to Cummins,
use this fault code
number
Fault description
Press Key 3 to clear this fault
and remove it from the list
Kommentare zu diesen Handbüchern