CUMMINS ED-3 Betriebsanweisung PDF herunterladen (Seite 5)

Electronic Display Description

The ED-3 Electronic Display is an LCD display with 5 menu keys that can display engine

parameters in a variety of formats. Display formats are: basic, analog gauge, graphical, text,

and quad display. The Electronic Display receives engine data from an industry standard

SAE J1708/J1587 or J1939 datalink. Displayable engine parameters will vary with the

engine application, but typically include engine speed, throttle position, system voltage, and

engine load.

Boat speed can also be displayed for some engine applications if a Global Positioning

System (GPS) or a speed transducer is connected on the RS422 receive (RX) input. See the

appendix for connector pinout information.

DATALINK Menu

ENGINE Selects the engine model that is connected to the display. Choices

include QSB, QSC, QSM11, QSX, QSK, QST30, 480C-E, M11ECMC,

N14ECMC, and CENTRY. Use the ADJUST key (key 4) to enter the

Setting Menu then use up/down scroll keys (keys 1 and 2) to move

the pointer to the desired engine model. Press the SELECT

key (key 4) to ﬁll in the box in the right hand column adjacent to

the desired model, then press the BACK key (key 5) to return to the

Datalink Menu.

DATA TYPE Selects Data type (J1939 or J1587). Use the ADJUST key (key 4) to

desired setting.

DATA LINK INFO J1587 INFO Allows user to view J1587 message data

(when Data Type is J1587) J1587 VIEWER Allows user to view J1587 raw messages received

by the Display.

NMEA VIEWER Allows user to view NMEA raw messages received by

the Display.

Use the ADJUST key (key 4) to enter the Data Link Info screen. Use

the up/down scroll keys (keys 1 and 2) to move the pointer to the

desired selection followed by the ADJUST key (key 4) to enter the

screen and view the data.

Use the BACK key (key 5) to return to the Data Link Info menu.

J1939 SETTINGS Allows user to conﬁgure engine source to suit the conﬁguration of

(when Data Type is J1939)

the installation. Choices include 1 (Actual SA 00), 2 (Actual SA 01),

3 (Actual SA 242), 4 (Actual SA 243), 5 (Actual SA 244) and 6 (Actual

SA 245). Use the ADJUST key (Key 4) to enter the J1939 Settings

screen. Use the ADJUST key (Key 4) to select the desired setting,

press the BACK key (Key 5) to return to the Data- Link Menu.

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

CUMMINS ED-3 Betriebsanweisung Seite 5