CUMMINS QC5200 Betriebsanweisung PDF herunterladen (Seite 50)

key while the selected row is highlighted. When a fault code is

selected, the Fault Description dialog box is opened. The Fault

Description dialog box provides more detailed information about

the fault code. This includes a description of the fault, the

Parameter Identifier (PID), Subsystem Identifier (SID), or

Suspect Parameter Number (SPN), the Failure Mode Identifier

(FMI), and the fault occurrence count. This information can be

retrieved on current faults (in Live mode), as well as on fault

records that are stored on the handheld device (in Review

mode). When finished with the Fault Description information,

exit this mode by tapping the OK button on the form.

Active-Inactive Faults

A fault can be either active, which indicates that the

conditions which trigger that fault are currently active,

or it can be inactive, which indicates that conditions

have existed in the past to trigger that fault code, but

they no longer exist. Both active and inactive types of

faults can be monitored with the Q

UICK

HECK

application. They are displayed in the Active or Inactive

Faults lists respectively.

Clear Inactive Faults Button

The clear inactive faults button will issue a generic

command to the ECM to remove the current inactive

faults from the module. This will also clear the fault

lists and request all of the fault information again. The

Clear Inactive Faults button will be disabled unless the

connected vehicle has inactive faults.

Monitor Screen

The Monitor screen is utilized to

display live analog sensor and

engine or subsystem parameter

data, such as various speeds,

temperatures, and pressures. The

units displayed can be converted

to the metric system by using the

ONFIGURATOR

application.

Depending on the engine or

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 88 89

Keine Kommentare

CUMMINS QC5200 Betriebsanweisung Seite 50