CUMMINS N14 Spezifikationen PDF herunterladen (Seite 113)

100

101

Cut off the ends of the gasket even with the cylinder block

oil pan mounting flange.

Mount a dial indicator on the front face of the crankshaft.

Put the indicator plunger against the oil seal bore, and set

the dial indicator to ‘‘0’’ (zero).

Rotate the crankshaft one complete revolution while mon-

itoring the indicator. The total indicator reading must not

exceed 0.38 mm [0.015-inch].

If the total indicator runout exceeds 0.38 mm [0.015-

inch], remove the gear cover. Check the cover and the

housing for nicks or burrs.

Cleanthe gear coverand the housingsurfaces thoroughly.

Repeat the gear cover installation procedure, and check

the total indicator runout again. If the total indicator read-

out is not within specifications, the gear cover must be

replaced.

Engine Assembly (00-02) Gear Cover - Installation

N14 Page 0-93

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 113

Kommentare zu diesen Handbüchern