CUMMINS N14 Spezifikationen PDF herunterladen (Seite 358)

100

101

Use valve spring tester, Part No. 3375182, to determine

if the spring is defective.

NOTE: Compress the spring to a height of 46.23 mm [1.820

inches]. The force required must be:

• Minimum: 98 Newtons [22 lbf]

• Maximum: 116 Newtons [26 lbf]

NOTE: If the force required to compress the spring is not

within the specifications given, the spring must be replaced.

Visually inspect the high pressure relief valve retainer

plug, the valve disc, the washer, and the valve spring for

damage.

Use valve spring tester, Part No. 3375182, to measure

the relief spring tension.

NOTE: Compress the spring to a height of 29.08 mm [1.145

inches]. The force required must be:

• Minimum: 262 Newtons [59 lbf]

• Maximum: 320 Newtons [72 lbf]

NOTE: If the force required to compress the spring is not

within the specifications given, the spring must be replaced.

Assembly

Use clean 15W-40 oil to lubricate the drive shaft.

Install the drive shaft, from the gear pocket side of the oil

pump body, into the drive shaft bore.

Use clean 15W-40 oil to lubricate the inside diameter of

the oil pump main drive gear.

Lubricating Oil Pump - Rebuild (07-06) Lubricating Oil System

N14Page 7-16

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 358

Kommentare zu diesen Handbüchern