CUMMINS N14 Spezifikationen PDF herunterladen (Seite 200)

100

101

Bushings (No. 6 through No. 2) - Installation

An alignment pointer, Part No. 3823635, is used to align

the cam bearing oil holes with the oil holes in the block.

To use, mount the bearing on the driver. Place the align-

ment pointer against the machined side of the block at the

cam follower holes with the end of the rod at the top of the

bearing. Rotate the cam bearing until the seam of the

bearing is at the end of the rod. Press the cam bearing

in as described.

Use bushing driver (1), Part No. 3375861, to install bush-

ings No. 1, No. 2, No. 4, and No. 6.

Use bushing driver (2), Part No. 3376412, to install bush-

ings No. 3 and No. 5.

Install the tool assembly through the camshaft bore until

the driver is in the cavity between the bores where the

bushing is to be installed.

Install the bushing guide into the camshaft bore next to

the bore where the bushing is to be installed.

An alignment pointer, Part No. 3823635, is used to align

the cam bearing oil holes with the oil holes in the block.

To use, mount the bearing on the driver. Place the align-

ment pointer against the machined side of the block at the

cam follower holes with the end of the rod at the top of the

bearing. Rotate the cam bearing until the seam of the

bearing is at the end of the rod. Press the cam bearing

in as described.

Cylinder Block - Assembly (01-05) Cylinder Block

N14Page 1-32

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 200

Kommentare zu diesen Handbüchern