CUMMINS N14 Spezifikationen PDF herunterladen (Seite 71)

100

101

Use a lint free cloth to clean the thrust bearings, the main

bearing shells, and the main bearing caps.

NOTE: If used thrust bearings are to be installed, each must

be installed in its original location in the engine. The bearing

journal numbers must have been marked on the bearing

during disassembly.

Use clean LubriplateT 105 or its equivalent to lubricate

the upper thrust bearings.

Caution: The grooves must be toward the crankshaft.

Install the upper thrust bearings in the No. 7 main bearing

saddle.

NOTE: Push the crankshaft toward the front of the engine

to install the front bearing and to the rear of the engine to

install the rear bearing.

The end of the thrust bearings must be even with the

main bearing cap mounting surface.

Caution: Do not intermix the main bearing dowel ring

and the main bearing capscrew washers. The hardened

main bearing capscrew washer (1) is approximately 0.76

mm [0.030-inch] thicker than the soft main bearing dowel

ring (2). Intermixing the capscrew washers and dowel

rings will result in main bearing failure.

Engine Assembly (00-02) Crankshaft - Installation

N14 Page 0-51

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 71

Kommentare zu diesen Handbüchern