CUMMINS N14 Spezifikationen PDF herunterladen (Seite 357)

100

101

Measure the outside diameter of the drive and the driven

shafts in the bushing contact area.

Shaft O.D.

mm in

22.20 MIN 0.8745

22.22 MAX 0.8750

NOTE: Shafts that are damaged or worn smaller than the

minimum given must be replaced. Refer to Lubricating Oil

Pump Drive Gear or Shaft - Replacement (07-09).

Visually inspect the main drive gear for cracks, chipped,

or broken teeth.

Inspect the bore of the gear for scoring or other damage.

Measure the inside diameter of the main drive gear bore.

Main Drive Gear Bore I.D.

mm in

22.161 MIN 0.8725

22.187 MAX 0.8735

NOTE: If the main drive gear bore is worn beyond the max-

imum limit, the drive gear must be replaced.

Visually inspect the main oil regulator plunger for

scratches or scoring.

NOTE: If scratches are deep enough to be felt with a fin-

gernail, the plunger must be replaced.

Visually inspect the spring for damaged or broken coils.

Lubricating Oil System Lubricating Oil Pump - Rebuild (07-06)

N14 Page 7-15

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 357

Kommentare zu diesen Handbüchern