CUMMINS N14 Spezifikationen PDF herunterladen (Seite 231)

100

101

NOTE: Oversize bearing shells are available for crankshafts

which are 0.25 mm [0.010-inch], 0.51 mm [0.020-inch], 0.76

mm [0.030-inch], or 1.02 mm [0.040-inch] undersize.

Bearing shells are identified by steel stamped characters

on the back of the bearings to indicate either standard or

the amount of oversize.

Thrust Bearings - Inspection

Visually inspect the thrust bearings for cracks or damage

at the locating notch.

Measure the thrust bearing thickness. Measure the bear-

ings in areas that show visible wear.

Thrust Bearing Thickness

mm in

6.185 MIN 0.2435

6.312 MAX 0.2485

NOTE: Thrust bearings are available in 0.25 mm [0.010-inch]

and 0.51 mm [0.020-inch] oversize thicknesses.

In an assembled engine, the crankshaft end clearance

must be 0.10 mm to 0.58 mm [0.004 inch to 0.023-inch].

Refer to Engine Assembly in Procedure 00-02.

Camshaft - Cleaning and Inspection

(01-17)

Cleaning

Warning: When using a steam cleaner, wear protective

clothing and safety glasses or a face shield. Hot steam

can cause serious personal injury.

Clean the camshaft with solvent or steam and dry it with

compressed air.

Cylinder Block Camshaft - Cleaning and Inspection (01-17)

N14 Page 1-63

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 231

Kommentare zu diesen Handbüchern