CUMMINS N14 Spezifikationen PDF herunterladen (Seite 93)

100

101

Install two t-bolts into the flywheel clutch mounting sur-

face.

Install two 5/8 - 18 x 6-inch guide studs in the crankshaft

flange.

Warning: Because this part weighs more than 23 kg [50

lbs], two people or a hoist will be required to lift the part

to avoid personal injury.

Install the flywheel on the guide stud.

Caution: Do not use an anti-seize compound, penetrat-

ing oil, or oil containing a friction modifier to lubricate

the capscrews. This will result in incorrect capscrew

torque and possible capscrew failure.

Lubricate the threads of the capscrews and the surface

of the washers with 15W-40 lubricating oil.

Install the four capscrews.

Remove the t-bolts and the guide studs.

Install the remaining two capscrews in the holes from

which the guide studs were removed.

Tighten the capscrews in a star pattern.

Torque Value: 271 N•m [200 ft-lb]

Bore Alignment - Measurement

Use dial indicator gauge (1), Part No. 3376050, or its

equivalent and dial gauge attachment (2), Part No. ST-

1325, to inspect the flywheel bore (3) and the surface (4)

runout.

Install the attachment to the flywheel housing.

Install the gauge on the attachment.

Install the contact tip of the indicator against the inside

diameter of the flywheel bore, and set the dial indicator

to ‘‘0.’’

Engine Assembly (00-02) Flywheel - Installation

N14 Page 0-73

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 93

Kommentare zu diesen Handbüchern