CUMMINS N14 Spezifikationen PDF herunterladen (Seite 263)

100

101

After grinding the valve seats, use a bristle brush to clean

the inside diameter of the valve guides.

Use solvent to clean the cylinder head. Dry with com-

pressed air.

Assembly

Apply cup plug sealant, Part No. 3375068, to the outside

diameter of the expansion plugs.

Use expansion plug drivers to install the expansion plugs

in the cylinder head. Refer to the chart below.

Cup Plug Size

Driver Tool No.

3/4-inch 3376815

1 inch 3376816

NOTE: Use the correct expansion plug driver to make sure

the expansion plugs are installed to the correct depth in the

cylinder head. Drive the plug until the shoulder of the driver

contacts the cylinder head.

Use clean 15W-40 oil to prelubricate the valve stems.

Install the valves in their original position in the cylinder

head.

NOTE: After the valves are installed, put the cylinder head

on a flat surface so the cylinder head surface will not be

damaged.

Install the valve stem seal.

Install the valve springs.

Install the valve spring retainers.

Cylinder Head Cylinder Head - Rebuild (02-02)

N14 Page 2-21

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 263

Kommentare zu diesen Handbüchern