CUMMINS N14 Spezifikationen PDF herunterladen (Seite 66)

100

101

Warning: Because this part weighs more than 23 kg [50

lbs], two people or a hoist will be required to lift the

crankshaft to avoid personal injury.

Use a hoist and a lifting sling to remove the crankshaft.

Push the upper main bearing on the end that does not

have the dowel ring groove.

NOTE: Mark the bearing shells with the journal number from

which they were removed if they are to be used again or if

failure analysis is required.

Cylinder Block - Removal from the

Rebuild Stand

Use a nylon lifting sling, Part No. 3375957 (with a leather

sleeve), to lift the cylinder block.

Remove the capscrews and the cylinder block from the

rebuild stand.

Refer to Cylinder Block, Group 01, for cleaning and in-

spection purposes.

Engine Assembly (00-02)

Cylinder Block - Installation on the

Rebuild Stand

NOTE: Use the engine rebuild stand, Part No. 3375194, and

the adapter plate, Part No. 3375013.

Use six 5/8 - 11 X 1 3/4-inch grade 5 capscrews to install

the adapter plate to the rebuild stand.

Torque Value: 102 N•m [75 ft-lb]

Cylinder Block - Removal from the Rebuild Stand Engine Assembly (00-02)

N14Page 0-46

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 66

Kommentare zu diesen Handbüchern