CUMMINS N14 Spezifikationen PDF herunterladen (Seite 296)

100

101

Place the rocker lever assembly over the dowel pin and

dowel ring located in the rocker housing.

NOTE: Do not damage the dowel pin and dowel ring located

in the rocker housing.

Make sure the push rods are in the cam follower sockets

and align the push rods with the injector and valve rocker

lever adjusting screws.

Alternately tighten the rocker shaft capscrews in 54 N•m

[40 ft-lb] increments to 156 N•m [115 ft-lb].

Adjust the valves and injectors. Refer to Procedure 7-04

in the N14 Troubleshooting and Repair Manual, Bulletin

No. 3810456.

Rocker Lever Bushing - Replacement

(03-02)

Disassembly

Install the rocker lever in an arbor press.

Use rocker lever block and mandrel set (1), Part No.

ST-691, and a support (2) to push the bushing out of the

rocker lever.

Rocker Lever Bushing - Replacement (03-02) Rocker Lever Housing Assembly

N14Page 3-12

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 296

Kommentare zu diesen Handbüchern