CUMMINS N14 Spezifikationen PDF herunterladen (Seite 449)

100

101

Engine Dynamometer - Install Engine

(14-01)

NOTE: Be sure the dynamometer capacity is sufficient to

permit testing at 100 percent of the engine rated horse-

power. If the capacity is not enough, the testing procedure

must be modified to the restrictions of the dynamometer.

Use engine lifting fixture, Part No. 3822512, to install the

engine to the test stand. Align and connect the dyna-

mometer. Refer to the manufacturer’s instructions for

aligning and testing the engine.

Refer to Service Bulletin No. 3666005, Dynamometer and

Road Engine Testing, for detailed instructions on auxil-

iary aftercooling system attachment.

NOTE: Some engines are equipped with fittings used for

CompuchekT testing sensors. The sensor probes used for

CompuchekT and dynamometer testing are not compatible.

If the same location is used, remove the CompuchekT fitting

and install adapters for the dynamometer sensor.

Install the coolant pressure sensor (1).

Install the coolant temperature sensor (2).

Connect the coolant supply to the water inlet connection.

Connect the coolant return to the water outlet connection.

Install the drain plugs and close all of the water drain

cocks.

Loosen the cooling system vent line.

Fill the system with coolant until it flows from the vent.

Tighten the vent line and finish filling the system.

Engine Testing Engine Dynamometer - Install Engine (14-01)

N14 Page 14-9

1 2 ... 444 445 446 447 448 449 450 451 452 453 454 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 449

Kommentare zu diesen Handbüchern