CUMMINS N14 Spezifikationen PDF herunterladen (Seite 299)

100

101

Steam clean the reusable gaskets. Dry with compressed

air, and check for cuts or deformations in the silicone

bead.

Replace the gasket if there are any cuts, abrasions, or

deformations in the silicone bead. Check to see if the

nylon carrier is cracked or broken; replace if necessary.

NOTE: The reusable gaskets must not be cleaned with

solvent. Solvent will deteriorate and swell the silicone bead

and destroy the gasket. The gaskets must be cleaned with

soap and water.

Inspection

Inspect each cover for cracks or damage, and replace if

necessary.

On the cover fitted with the crankcase breather tube,

inspect the breather baffle for damage.

Rocker Lever Housing Assembly -

Cleaning and Inspection for Reuse

(03-05)

NOTE: On CELECT™ engines while handling the rocker

lever housings, protect the wiring harness pass through

connectors. Do not subject the pass through connectors to

impact forces and do not rest the housing on the face with

the pass through connectors.

Water Manifold Tube - Removal

Remove the o-ring plug and water tube from the water

manifold with service tool, Part No. 3823819.

Insert the jumper tube removal tool into the retainer clamp

slot. Use a pry bar and pry the jumper tube out of the

water manifold.

Discard the o-rings.

Rocker Lever Housing AssemblyRocker Lever Housing Assembly - Cleaning and Inspection for Reuse (03-05)

N14 Page 3-15

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 299

Kommentare zu diesen Handbüchern