CUMMINS N14 Spezifikationen PDF herunterladen (Seite 234)

100

101

Caution: Do not use a heating torch to remove the gear.

If you use a heating torch, a new gear must be installed.

Push the shaft from the gear.

NOTE: If the camshaft key is marked with an arrow, record

the direction the arrow on the key is pointed (toward or away

from the camshaft) for future reference.

Use a flat chisel and a hammer to remove the camshaft

key.

Record the size (amount of offset) and the part number

of the key.

Cleaning

Use solvent to clean the parts. Dry them with compressed

air.

Inspection

Caution: If the inside diameter of the gear is damaged

or has fretting in excess of a 3.175 mm [0.125-inch] wide

band, do not use the gear. Fretting or damage can result

in gear movement on the camshaft nose which can cause

camshaft nose failure.

Visually inspect the camshaft gear for cracks, chipped, or

broken teeth.

Inspect the bore of the gear for fretting or burrs.

NOTE: If the fretting, burrs, or raised material can not be

removed with a fine crocus cloth, replace the gear.

Inspect the gear keyway for burrs.

Remove burrs with a fine crocus cloth.

NOTE: If the keyway is damaged or the burrs can not be

removed with a fine crocus cloth, the gear must be replaced.

Camshaft Gear - Replacement (01-18) Cylinder Block

N14Page 1-66

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 234

Kommentare zu diesen Handbüchern