CUMMINS N14 Spezifikationen PDF herunterladen (Seite 118)

100

101

Lubricating Oil Pan - Installation

Install the oil pan gasket and the oil pan on the cylinder

block. Use your fingers to install and tighten one of the

7/16-inch oil pan mounting capscrews on each side of the

oil pan, halfway between the front and the rear of the oil

pan. Use your fingers to install and tighten all the mount-

ing capscrews.

Tighten the four 5/16-inch capscrews in the rear of the oil

pan in the sequence shown.

Torque Value: 27 N•m [20 ft-lb]

Tighten the thirty-two (32) 7/16-inch capscrews in the

sequence shown.

Torque Value: 68 N•m [50 ft-lb]

Fuel Crossovers - Installation

Use new o-rings, and install the two fuel crossover con-

nections and the two cover plates. Tighten the capscrews.

Torque Value: 4.0 N•m [35 in-lb]

Rocker Lever Housing - Installation

Install two o-rings (1) on each of the two water tubes (2).

Install one o-ring (1) on each of the two water plugs (3).

Apply a non-petroleum based lubricant such as soap or

vegetable oil to the o-rings on the tubes and the plugs and

to the bores in the rocker housing.

Lubricating Oil Pan - Installation Engine Assembly (00-02)

N14Page 0-98

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 118

Kommentare zu diesen Handbüchern