CUMMINS N14 Spezifikationen PDF herunterladen (Seite 301)

100

101

Visually inspect the pass through connectors for cracks,

bent contacts, or other damage. Replace if necessary.

Refer to the N14 Troubleshooting and Repair Manual

CELECT™ System, Bulletin No. 3810469.

On STC engines, remove the oil manifold.

NOTE: When removing the oil manifold connector from the

rocker lever housing, use a wide flat pry bar. Pry at the

center of the oil manifold. Remove the connector evenly

from both of the pass through ports to prevent damage to the

connector and the rocker lever housing.

Clean and inspect the oil manifold. Refer to STC Oil

Plumbing - Cleaning and Inspection for Reuse (03-06).

Cleaning

Steam clean the rocker lever housings.

Dry with compressed air.

NOTE: Make sure the oil supply hole is free of dirt or other

deposits.

Do not remove the rocker shaft dowel pins, dowel rings,

or brass cup plug for cleaning.

Inspection

Visually inspect the housings for cracks or damage, and

replace if necessary.

Visually inspect the capscrew holes for damaged threads.

If threads are damaged, refer to the Alternative Repair

Manual, Bulletin No. 3379035.

Visually inspect the water manifold sections for cracks,

pitting, corrosion, or other damage.

Rocker Lever Housing AssemblyRocker Lever Housing Assembly - Cleaning and Inspection for Reuse (03-05)

N14 Page 3-17

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 301

Kommentare zu diesen Handbüchern