CUMMINS N14 Spezifikationen PDF herunterladen (Seite 37)

100

101

Install the mounting plate adapter on the rear water

header.

Use five 1/4-20 X 1 1/4-inch capscrews to mount the

adapter. Tighten the capscrews.

Torque Value: 10 N•m [7 ft-lb]

Install three 1/2-13 X 3 3/8-inch capscrews through the

adapter plate as shown.

Install the three adapter plate spacersover the capscrews.

Use a lifting fixture, Part No. ST-125 or 3822512, to lift the

engine.

Align the exhaust side of the engine to the adapter plate

of the rebuild stand.

Installation such as short and medium nose conventional

chassis, the factory installed rear engine lifting brackets

are usually removed due to space contraints. In this case,

the portable rear engine lifting bracket, Part No. 3823835,

will be required to install the engine onto the rebuild

stand.

Align the mounting hole in the adapter plate (1) with the

capscrew hole (2) in the mounting plate adapter.

Use a 5/8-11 X 1 3/4-inch grade 5 capscrew to mount the

adapter plate to the mounting plate adapter. Use your

fingers to tighten the capscrew.

Engine Disassembly (00-01) Engine - Installation on the Rebuild Stand

N14 Page 0-17

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 37

Kommentare zu diesen Handbüchern