CUMMINS N14 Spezifikationen PDF herunterladen (Seite 127)

100

101

Tighten the adjusting screw on the injector rocker lever.

Torque Value: 2.8 N•m [25 in-lb]

Caution: After preloading the CELECT™ injector to 2.8

N•m [25 in-lb], make sure to back out the adjusting

screw two flats (120 degrees) or damage to the injector

will result.

Back out the adjusting screw on the injector rocker lever

two flats (120 degrees).

NOTE: Two flats will provide 0.63 mm [0.025 inch] lash. The

specification is 0.50 to 0.74 mm [0.020 to 0.029 inch] lash.

Hold the adjusting screw and tighten the lock nut.

Torque Value: 68 N•m [50 ft-lb]

After setting the injector on a given cylinder, set the

valves on the same cylinder.

With the ‘‘A’’ set mark aligned with the pointer on the gear

cover and both valves closed on cylinder No. 1, loosen

the lock nuts on the intake and the exhaust valve adjust-

ing screws.

Engine Assembly (00-02) Injector and Valve Adjustment

N14 Page 0-107

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 127

Kommentare zu diesen Handbüchern