CUMMINS N14 Spezifikationen PDF herunterladen (Seite 58)

100

101

Cam Follower Assemblies - Removal

Remove the cam follower housing assemblies as follows:

1. Remove the six capscrews and studs from each cam

follower housing.

NOTE: Record the position of the studs prior to removal.

2. Remove the cam follower housings and gaskets.

NOTE: To prevent increased wear, mark the cam follower

housing assemblies as they are removed so they can be

installed back in their original location on the block.

Camshaft Bearing Support - Removal

Remove the three capscrews from the support.

Use a rubber or plastic mallet to rotate the bearing sup-

port approximately 60 degrees.

Use a suitable pry bar to remove the bearing support from

the gear cover.

NOTE: Be careful not to damage the bearing support

surfaces.

Remove the o-ring and the shims from the bearing sup-

port. Do not dispose of the shims.

Cam Follower Assemblies - Removal Engine Disassembly (00-01)

N14Page 0-38

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 586 587

Kommentare zu diesen Handbüchern

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spezifikationen Seite 58

Kommentare zu diesen Handbüchern